[    0.000000]  -> early_init_devtree(c000000003fe3000)
[    0.000000] uspdaa_mem argument is depracated
[    0.000000] USDPAA memory restricted to 0xa0000000
[    0.000000] Reserved memory: initialized node bman-fbpr, compatible id fsl,bman-fbpr
[    0.000000] Reserved memory: initialized node qman-fqd, compatible id fsl,qman-fqd
[    0.000000] Reserved memory: initialized node qman-pfdr, compatible id fsl,qman-pfdr
[    0.000000]  usdpaa_mem_init is invoked to initialize the phy_start memory
[    0.000000] Reserved memory: initialized node usdpaa_mem, compatible id fsl,usdpaa-mem
[    0.000000] ===== COMMSCOPE removing ===== a4d000 -> 200000
[    0.000000] ===== COMMSCOPE removing DSP reserved areas ==== c0000000 -> 40000000
[    0.000000] Phys. mem: 3bfe00000
[    0.000000] -> move_device_tree
[    0.000000] <- move_device_tree
[    0.000000] Allocated 45056 bytes for 24 pacas at c00000003fff5000
[    0.000000] Scanning CPUs ...
[    0.000000] boot cpu: logical 0 physical 0
[    0.000000]  <- early_init_devtree()
[    0.000000] Using CoreNet Generic machine description
[    0.000000] MMU: Supported page sizes
[    0.000000]          4 KB as direct
[    0.000000]       2048 KB as direct & indirect
[    0.000000]       4096 KB as direct
[    0.000000]      16384 KB as direct
[    0.000000]      65536 KB as direct
[    0.000000]     262144 KB as direct
[    0.000000]    1048576 KB as direct
[    0.000000] MMU: Book3E HW tablewalk enabled
[    0.000000] Found legacy serial port 0 for /soc@ffe000000/serial@11c500
[    0.000000]   mem=ffe11c500, taddr=ffe11c500, irq=0, clk=333333330, speed=0
[    0.000000] Found legacy serial port 1 for /soc@ffe000000/serial@11c600
[    0.000000]   mem=ffe11c600, taddr=ffe11c600, irq=0, clk=333333330, speed=0
[    0.000000] Found legacy serial port 2 for /soc@ffe000000/serial@11d500
[    0.000000]   mem=ffe11d500, taddr=ffe11d500, irq=0, clk=333333330, speed=0
[    0.000000] Found legacy serial port 3 for /soc@ffe000000/serial@11d600
[    0.000000]   mem=ffe11d600, taddr=ffe11d600, irq=0, clk=333333330, speed=0
[    0.000000] bootconsole [udbg0] enabled
[    0.000000] CPU maps initialized for 2 threads per core
[    0.000000]  (thread shift is 1)
[    0.000000] Freed 28672 bytes for unused pacas
[    0.000000] Starting Linux PPC64 #1 SMP Wed Jul 30 12:31:26 IST 2025
[    0.000000] -----------------------------------------------------
[    0.000000] ppc64_pft_size    = 0x0
[    0.000000] phys_mem_size     = 0x3bfe00000
[    0.000000] dcache_line_size  = 0x40
[    0.000000] icache_line_size  = 0x40
[    0.000000] cpu_features      = 0x00180480581802c8
[    0.000000]   possible        = 0x00180480581802c8
[    0.000000]   always          = 0x00180400581802c0
[    0.000000] cpu_user_features = 0xdc008000 0x08000000
[    0.000000] mmu_features      = 0x000a0010
[    0.000000] firmware_features = 0x0000000000000000
[    0.000000] -----------------------------------------------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.35-rt41 (sk1141@BC-CentOS) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Jul 30 12:31:26 IST 2025
[    0.000000] CoreNet Generic board
[    0.000000] Top of RAM: 0x400000000, Total RAM: 0x3bfe00000
[    0.000000] Memory hole size: 1026MB
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000080000000-0x00000003ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000000a4cfff]
[    0.000000]   node   0: [mem 0x0000000000c4d000-0x00000000bfffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000003ffffffff]
[    0.000000] On node 0 totalpages: 3931648
[    0.000000] free_area_init_node: node 0, pgdat c000000000b54180, node_mem_map c0000003ec000000
[    0.000000]   DMA zone: 8192 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 523776 pages, LIFO batch:31
[    0.000000]   Normal zone: 57344 pages used for memmap
[    0.000000]   Normal zone: 3407872 pages, LIFO batch:31
[    0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts
[    0.000000] PERCPU: Embedded 17 pages/cpu @c0000003fe500000 s29080 r0 d40552 u131072
[    0.000000] pcpu-alloc: s29080 r0 d40552 u131072 alloc=1*1048576
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3866112
[    0.000000] Kernel command line: root=/dev/mtdblock9 ro rootfstype=jffs2 init=/init siq_board_type=CU_200103 hugepage_restrict=0xc0000000 default_hugepagesz=1g hugepagesz=1g hugepages=1 usdpaa_mem=256M usdpaa_restrict=0xa0000000 bportals=s0 qportals=s0 isolcpus=1,2,3,4,5,7 DEBUG_MODE=y console=ttyS1,115200 HOSTNAME=airv_cu PRIPART=4 ip=10.9.11.170:10.8.12.17:10.8.0.240:255.255.0.0:airv_cu:eth0:off panic=1
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 65536 bytes
[    0.000000] early log buf free: 10940(66%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 13992600K/15726592K available (8060K kernel code, 1224K rwdata, 2892K rodata, 348K init, 813K bss, 1733992K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU debugfs-based tracing is enabled.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:512 nr_irqs:512 16
[    0.000000] mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe040000, max 8 CPUs
[    0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff
[    0.000000] mpic: Initializing for 512 sources
[    0.000000] time_init: decrementer frequency = 41.666666 MHz
[    0.000000] time_init: processor frequency   = 1599.999984 MHz
[    0.000003] clocksource timebase: mask: 0xffffffffffffffff max_cycles: 0x99c0f5e04, max_idle_ns: 440795204113 ns
[    0.010086] clocksource: timebase mult[18000006] shift[24] registered
[    0.016516] clockevent: decrementer mult[aaaaaa8] shift[32] cpu[0]
[    0.018199] Console: colour dummy device 80x25
[    0.022574] pid_max: default: 32768 minimum: 301
[    0.027236] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.034027] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.041785] Initializing cgroup subsys memory
[    0.046071] Initializing cgroup subsys devices
[    0.050487] Initializing cgroup subsys freezer
[    0.054917] Initializing cgroup subsys perf_event
[    0.059608] Initializing cgroup subsys net_prio
[    0.064128] Initializing cgroup subsys hugetlb
[    0.068558] Initializing cgroup subsys debug
[    0.073073] e6500 family performance monitor hardware support registered
[    0.083209] Brought up 8 CPUs
[    0.086353] devtmpfs: initialized
[    0.095198] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.105813] NET: Registered protocol family 16
[    0.110723] Bman ver:0a02,02,01
[    0.210451] qman-fqd addr 0x00000003fe800000 size 0x800000
[    0.215847] qman-pfdr addr 0x00000003fc000000 size 0x2000000
[    0.221496] Qman ver:0a01,03,01,01
[    0.237584] Machine: fsl,B4860QDS
[    0.240805] SoC family: QorIQ
[    0.243765] SoC ID: svr:0x86880022, Revision: 2.2
[    0.249896] Can't find hose for PCI bus 0!
[    0.253970] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV ffe200000.pcie (INTERRUPT)
[    0.264964] MPC85xx_edac acquired irq 20 for PCI Err
[    0.269888] MPC85xx_edac PCI err registered
[    0.294904] software IO TLB [mem 0x7bf45000-0x7ff45000] (64MB) mapped at [c00000007bf45000-c00000007ff44fff]
[    0.304649] PCI: Probing PCI hardware
[    0.308293] PCI: Probing PCI hardware done
[    0.308608] Setting up Freescale MSI support
[    0.309083] Setting up Freescale MSI support
[    0.309546] Setting up Freescale MSI support
[    0.310012] Setting up Freescale MSI support
[    0.321282] vgaarb: loaded
[    0.324040] SCSI subsystem initialized
[    0.327822] pps_core: LinuxPPS API ver. 1 registered
[    0.332698] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.341832] PTP clock support registered
[    0.345754] EDAC MC: Ver: 3.0.0
[    0.349262] bman-fbpr addr 0x00000003ff000000 size 0x1000000
[    0.354876] Bman err interrupt handler present
[    0.360119] Bman portal (shared) initialised, cpu 0
[    0.364907] Bman portal (slave) initialised, cpu 1
[    0.369684] Bman portal (slave) initialised, cpu 2
[    0.374463] Bman portal (slave) initialised, cpu 3
[    0.379241] Bman portal (slave) initialised, cpu 4
[    0.384019] Bman portal (slave) initialised, cpu 5
[    0.388800] Bman portal (slave) initialised, cpu 6
[    0.393576] Bman portal (slave) initialised, cpu 7
[    0.398354] Bman portals initialised
[    0.401981] DPAA-QMAN: PFDR base address: 00000003fc000000, size: 0x2000000
[    0.409377] Qman err interrupt handler present
[    0.413964] QMan: Allocated lookup table at 8000000000002000, entry count 131073
[    0.422248] Qman portal (shared) initialised, cpu 0
[    0.427057] Qman portal (slave) initialised, cpu 1
[    0.431835] Qman portal (slave) initialised, cpu 2
[    0.436618] Qman portal (slave) initialised, cpu 3
[    0.441396] Qman portal (slave) initialised, cpu 4
[    0.446174] Qman portal (slave) initialised, cpu 5
[    0.450955] Qman portal (slave) initialised, cpu 6
[    0.455722] Qman portal (slave) initialised, cpu 7
[    0.460499] Qman portals initialised
[    0.464176] Bman: BPID allocator includes range 32:32
[    0.469240] Qman: FQID allocator includes range 256:512
[    0.474376] Qman: FQID allocator includes range 32768:32768
[    0.480027] Qman: CGRID allocator includes range 0:256
[    0.485264] Qman: pool channel allocator includes range 1025:15
[    0.491265] USDPAA region at 60000000:10000000(60000:10000), 1 TLB1 entries)
[    0.498253] fsl-ifc ffe124000.localbus: Freescale Integrated Flash Controller
[    0.505359] fsl-ifc ffe124000.localbus: IFC version 1.1, 8 banks
[    0.512169] Switched to clocksource timebase
[    0.521330] NET: Registered protocol family 2
[    0.525918] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.533744] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.540772] TCP: Hash tables configured (established 131072 bind 65536)
[    0.547359] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.553556] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.560304] NET: Registered protocol family 1
[    0.564594] PCI: CLS 0 bytes, default 64
[    0.564840] ***** INITIALISING COMMSCOPE SIGILL DRIVER *****
[    0.570412] COMMSCOPE request_mem_region() 0xa4d000 successful
[    0.576310] COMMSCOPE ioremap() 0xa4d000 successful
[    0.582290] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.588537] audit: initializing netlink subsys (disabled)
[    0.593878] audit: type=2000 audit(0.500:1): initialized
[    0.630638] HugeTLB registered 1 GB page size, pre-allocated 1 pages
[    0.636909] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.643249] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[    0.649678] HugeTLB registered 64 MB page size, pre-allocated 0 pages
[    0.656107] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[    0.663297] ntfs: driver 2.1.32 [Flags: R/O].
[    0.667595] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[    0.674762] fuse init (API version 7.23)
[    0.679579] io scheduler noop registered
[    0.683417] io scheduler deadline registered
[    0.687697] io scheduler cfq registered (default)
[    0.723577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.730717] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 20833333) is a 16550A
[    0.739810] console [ttyS1] disabled
[    0.743312] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 20833333) is a 16550A
[    0.752078] console [ttyS1] enabled
[    0.759023] bootconsole [udbg0] disabled
[    0.767247] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 20833333) is a 16550A
[    0.776451] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 20833333) is a 16550A
[    0.785336] Debug proc entry initialized for 8250 Serial driver
[    0.791127] ePAPR hypervisor byte channel driver
[    0.799407] brd: module loaded
[    0.804537] loop: module loaded
[    0.807704] SECMON: init the ariv secmon driver
[    0.812336] SECMON: SFP_OSPR 7
[    0.815383] SECMON: Intent to Secure(ITS) 1
[    0.819566] SECMON: SFP_DPR 1
[    0.822530] SECMON: SECMON_HPSR 8000ad00
[    0.826450] SECMON:TRUSTED STATE 1
[    0.829848] SECMON:Configuration SECMON_HPSVCR f
[    0.834463] SECMON:Configuration SECMON_HPSICR f
[    0.839078] SECMON:Configuartion SECMON_HPCOMR 30000
[    0.844040] SECMON: Configuration SECMON_HPLR 70000
[    0.848950] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.857371] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    0.863728] nand: Micron MT29F32G08AFACAWP
[    0.867824] nand: 2048 MiB, SLC, erase size: 512 KiB, page size: 4096, OOB size: 224
[    0.876425] Bad block table found at page 524160, version 0x01
[    0.883749] Bad block table found at page 524032, version 0x01
[    0.890320] nand_read_bbt: bad block at 0x000002d00000
[    0.895459] nand_read_bbt: bad block at 0x000002d80000
[    0.907219] fsl,ifc-nand fff800000.nand: IFC NAND device at 0xfff800000, bank 0
[    0.915071] fsl_espi ffe110000.spi: cs=0, init_csmode=0x100008
[    0.920941] fsl_espi ffe110000.spi: registered master spi32766 (dynamic)
[    0.921008] spi spi32766.0: setup mode 0, 8 bits/w, 1000000 Hz max --> 0
[    0.921113] fsl_espi ffe110000.spi: registered child spi32766.0
[    0.921118] fsl_espi ffe110000.spi: at 0x8000080080a06000 (irq = 53)
[    0.928393] libphy: Fixed MDIO Bus: probed
[    0.932892] libphy: Freescale XGMAC MDIO Bus: probed
[    0.938563] libphy: Freescale XGMAC MDIO Bus: probed
[    0.944233] libphy: Freescale XGMAC MDIO Bus: probed
[    0.949899] libphy: Freescale XGMAC MDIO Bus: probed
[    0.955582] libphy: Freescale XGMAC MDIO Bus: probed
[    0.960599] libphy: Freescale XGMAC MDIO Bus: probed
[    0.965616] libphy: Freescale XGMAC MDIO Bus: probed
[    0.970633] libphy: Freescale XGMAC MDIO Bus: probed
[    0.975648] libphy: Freescale XGMAC MDIO Bus: probed
[    0.980665] libphy: Freescale XGMAC MDIO Bus: probed
[    0.985681] libphy: Freescale XGMAC MDIO Bus: probed
[    0.990695] libphy: Freescale XGMAC MDIO Bus: probed
[    0.995716] libphy: Freescale XGMAC MDIO Bus: probed
[    1.000734] libphy: Freescale XGMAC MDIO Bus: probed
[    1.024557] ---------------- FMan DEBUG TRACE v1.3 --------------------- 
[    1.024568] FMan allocated MURAM debug area: base address = 0x80ecac00 / MURAM offset = 0x0004ac00 
[    1.024571] FMan MURAM debug area: base address = 0x80d4ac00 / MURAM offset = 0x0004ac00 
[    1.025098] Freescale FM module, FMD API version 21.1.0
[    1.033752] Freescale FM Ports module
[    1.037420] fsl_mac: fsl_mac: FSL FMan MAC API based driver
[    1.043414] fsl_mac ffe4e0000.ethernet: FMan MEMAC
[    1.048211] fsl_mac ffe4e0000.ethernet: FMan MAC address: 00:05:b9:51:ff:30
[    1.055453] fsl_mac ffe4e2000.ethernet: FMan MEMAC
[    1.060249] fsl_mac ffe4e2000.ethernet: FMan MAC address: 00:05:b9:51:ff:31
[    1.067495] fsl_mac ffe4e4000.ethernet: FMan MEMAC
[    1.072290] fsl_mac ffe4e4000.ethernet: FMan MAC address: 00:05:b9:51:ff:32
[    1.079537] fsl_mac ffe4e6000.ethernet: FMan MEMAC
[    1.084333] fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:05:b9:51:ff:33
[    1.091450] fsl_dpa: FSL DPAA Ethernet driver
[    1.096055] NTP - 0.1 dpa_ptp_init_circ size: 512 
[    1.100857] NTP - 0.1 dpa_ptp_init_circ size: 512 
[    1.105733] NTP - 0.1 dpa_ptp_init_circ size: 24 
[    1.110447] NTP - 0.1 dpa_ptp_init_circ size: 24 
[    1.115153] fsl_mac ffe4e0000.ethernet: /soc@ffe000000/fman@400000/ethernet@e0000: ptp 1588 is initialized.
[    1.128351] fsl_dpa: fsl_dpa: Probed interface eth0
[    1.133550] pps pps0: new PPS source ptp0
[    1.137563] fsl_advanced: FSL DPAA Advanced drivers:
[    1.142528] fsl_proxy: FSL DPAA Proxy initialization driver
[    1.148666] fsl_proxy-proxy fsl,dpaa:ethernet@1: probed MAC device with MAC address: 00:05:b9:51:ff:31
[    1.158158] fsl_proxy-proxy fsl,dpaa:ethernet@2: probed MAC device with MAC address: 00:05:b9:51:ff:32
[    1.167648] fsl_proxy-proxy fsl,dpaa:ethernet@3: probed MAC device with MAC address: 00:05:b9:51:ff:33
[    1.176988] fsl_dpa_shared: FSL DPAA Shared Ethernet driver
[    1.182752] fsl_dpa_macless: FSL DPAA MACless Ethernet driver
[    1.189832] fsl_dpa_macless: fsl_dpa_macless: Probed macless0 interface as eth1
[    1.198257] fsl_dpa_macless: fsl_dpa_macless: Probed macless1 interface as eth2
[    1.206695] fsl_dpa_macless: fsl_dpa_macless: Probed macless2 interface as eth3
[    1.214066] fsl_oh: FSL FMan Offline Parsing port driver
[    1.219741] fsl_oh fsl,dpaa:dpa-fman0-oh@2: Found OH node handle compatible with fsl,dpa-oh
[    1.228143] fsl_oh fsl,dpaa:dpa-fman0-oh@2: Allocating 0 ingress frame queues duples
[    1.235912] fsl_oh fsl,dpaa:dpa-fman0-oh@2: OH Align to 256
[    1.241553] fsl_oh fsl,dpaa:dpa-fman0-oh@2: OH port /soc@ffe000000/fman@400000/port@83000 enabled.
[    1.250516] fsl_oh fsl,dpaa:dpa-fman0-oh@2: Default egress frame queue: 111
[    1.257478] fsl_oh fsl,dpaa:dpa-fman0-oh@2: Default error frame queue: 110
[    1.264352] fsl_oh fsl,dpaa:dpa-fman0-oh@2: Initialized queues:
[    1.270289] fsl_oh fsl,dpaa:dpa-fman0-oh@3: Found OH node handle compatible with fsl,dpa-oh
[    1.278690] fsl_oh fsl,dpaa:dpa-fman0-oh@3: Allocating 0 ingress frame queues duples
[    1.286443] fsl_oh fsl,dpaa:dpa-fman0-oh@3: OH Align to 64
[    1.291940] fsl_oh fsl,dpaa:dpa-fman0-oh@3: IP Fragmentation enabled for OH port 2
[    1.299541] fsl_oh fsl,dpaa:dpa-fman0-oh@3: OH port /soc@ffe000000/fman@400000/port@84000 enabled.
[    1.308502] fsl_oh fsl,dpaa:dpa-fman0-oh@3: Default egress frame queue: 105
[    1.315464] fsl_oh fsl,dpaa:dpa-fman0-oh@3: Default error frame queue: 104
[    1.322339] fsl_oh fsl,dpaa:dpa-fman0-oh@3: Initialized queues:
[    1.328275] fsl_oh fsl,dpaa:dpa-fman0-oh@4: Found OH node handle compatible with fsl,dpa-oh
[    1.336676] fsl_oh fsl,dpaa:dpa-fman0-oh@4: Allocating 0 ingress frame queues duples
[    1.344428] fsl_oh fsl,dpaa:dpa-fman0-oh@4: OH Align to 0
[    1.349864] fsl_oh fsl,dpaa:dpa-fman0-oh@4: OH port /soc@ffe000000/fman@400000/port@85000 enabled.
[    1.358826] fsl_oh fsl,dpaa:dpa-fman0-oh@4: Default egress frame queue: 113
[    1.365787] fsl_oh fsl,dpaa:dpa-fman0-oh@4: Default error frame queue: 112
[    1.372662] fsl_oh fsl,dpaa:dpa-fman0-oh@4: Initialized queues:
[    1.378609] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.384441] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.390791] fsl-of-dma ffe100300.dma: dma channel dma-uio0-0 initialized
[    1.397619] fsl-of-dma ffe100300.dma: dma channel dma-uio0-1 initialized
[    1.404524] fsl-of-dma ffe100300.dma: dma channel dma-uio0-2 initialized
[    1.411335] fsl-of-dma ffe100300.dma: dma channel dma-uio0-3 initialized
[    1.418236] fsl-of-dma ffe100300.dma: dma channel dma-uio0-4 initialized
[    1.425112] fsl-of-dma ffe100300.dma: dma channel dma-uio0-5 initialized
[    1.431921] fsl-of-dma ffe100300.dma: dma channel dma-uio0-6 initialized
[    1.438797] fsl-of-dma ffe100300.dma: dma channel dma-uio0-7 initialized
[    1.445683] fsl-of-dma ffe101300.dma: dma channel dma-uio1-0 initialized
[    1.452551] fsl-of-dma ffe101300.dma: dma channel dma-uio1-1 initialized
[    1.459362] fsl-of-dma ffe101300.dma: dma channel dma-uio1-2 initialized
[    1.466236] fsl-of-dma ffe101300.dma: dma channel dma-uio1-3 initialized
[    1.473110] fsl-of-dma ffe101300.dma: dma channel dma-uio1-4 initialized
[    1.479923] fsl-of-dma ffe101300.dma: dma channel dma-uio1-5 initialized
[    1.486736] fsl-of-dma ffe101300.dma: dma channel dma-uio1-6 initialized
[    1.493551] fsl-of-dma ffe101300.dma: dma channel dma-uio1-7 initialized
[    1.500845] i2c /dev entries driver
[    1.504621] mpc-i2c ffe119000.i2c: timeout 1000000 us
[    1.509825] at24 0-0050: 16384 byte 24c128 EEPROM, writable, 64 bytes/write
[    1.517010] mpc-i2c ffe118000.i2c: timeout 1000000 us
[    1.522190] mpc-i2c ffe118100.i2c: timeout 1000000 us
[    1.527382] mpc-i2c ffe119100.i2c: timeout 1000000 us
[    1.532695] booke_wdt: powerpc book-e watchdog driver loaded
[    1.538358] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.545531] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.552633] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.559733] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.566832] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.573931] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.581030] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.588131] booke_wdt: core 0 Setting Watchdog Timer (wdt_period=34, sec=64)
[    1.595234] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software
[    1.603106] EDAC MC0: Giving out device to module MPC85xx_edac controller mpc85xx_mc_err: DEV mpc85xx_mc_err (INTERRUPT)
[    1.614007] MPC85xx_edac acquired irq 475 for MC
[    1.618623] MPC85xx_edac MC err registered
[    1.623079] EDAC MC1: Giving out device to module MPC85xx_edac controller mpc85xx_mc_err: DEV mpc85xx_mc_err (INTERRUPT)
[    1.633976] MPC85xx_edac acquired irq 476 for MC
[    1.638594] MPC85xx_edac MC err registered
[    1.643825] sdhci: Secure Digital Host Controller Interface driver
[    1.650005] sdhci: Copyright(c) Pierre Ossman
[    1.654363] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.661306] platform caam_qi: Linux CAAM Queue I/F driver initialised
[    1.667753] caam ffe300000.crypto: Instantiated RNG4 SH1
[    1.673163] caam ffe300000.crypto: device ID = 0x0a11020000000000 (Era 5)
[    1.679952] caam ffe300000.crypto: job rings = 4, qi = 1
[    1.688016] caam algorithms registered in /proc/crypto
[    1.694399] platform caam_qi: algorithms registered in /proc/crypto
[    1.702085] caam_jr ffe301000.jr: registering rng-caam
[    1.707548] caam ffe300000.crypto: fsl,sec-v5.3 algorithms registered in /proc/crypto
[    1.715624] fsl-of-rman ffe1e0000.rman: Of-device /soc@ffe000000/rman@1e0000 initialized
[    1.723819] fsl-of-rman ffe1e0000.rman: RMan inbound block0 initialized.
[    1.730621] fsl-of-rman ffe1e0000.rman: RMan inbound block1 initialized.
[    1.737427] fsl-of-rman ffe1e0000.rman: RMan inbound block2 initialized.
[    1.744230] fsl-of-rman ffe1e0000.rman: RMan inbound block3 initialized.
[    1.751936] Freescale USDPAA process driver
[    1.756120] USDPAA region @0x60000000 -> 10000000
[    1.760873] Freescale USDPAA process IRQ driver
[    1.765542] dce_sys_init done!
[    1.768902] No fsl,dce node
[    1.771942] Freescale pme2 db driver
[    1.775515] PME2: fsl_pme2_db_init: not on ctrl-plane
[    1.780567] Freescale pme2 scan driver
[    1.784356] fsl-pme2-scan: device pme_scan registered
[    1.789473] DPA Classifier Driver initialized.
[    1.793982] DPA IPSec Driver initialized.
[    1.798051] DPA Stats Driver initialized.
[    1.802065] Freescale hypervisor management driver
[    1.806859] fsl-hv: no hypervisor found
[    1.810736] u32 classifier
[    1.813455] Netfilter messages via NETLINK v0.30.
[    1.818168] nfnl_acct: registering with nfnetlink.
[    1.822967] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    1.829505] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    1.836089] ip_set: protocol 6
[    1.839206] ipip: IPv4 over IPv4 tunneling driver
[    1.844263] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.849636] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[    1.856009] arp_tables: (C) 2002 David S. Miller
[    1.860659] Initializing XFRM netlink socket
[    1.864997] NET: Registered protocol family 10
[    1.869989] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.875507] sit: IPv6 over IPv4 tunneling driver
[    1.880626] NET: Registered protocol family 17
[    1.885079] NET: Registered protocol family 15
[    1.889533] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.902157] Bridge firewalling registered
[    1.906171] Ebtables v2.0 registered
[    1.909811] arp-limit: module loaded
[    1.913395] 8021q: 802.1Q VLAN Support v1.8
[    1.917598] Key type dns_resolver registered
[    1.922447] fsl_generic: FSL DPAA Generic Ethernet driver
[    1.928951] fsl_dpa_generic: Probed generic0 interface as eth4
[    1.934837] hctosys: unable to open rtc device (rtc0)
[    2.025571] IP-Config: Gateway not on directly connected network
[    2.698139] VFS: Mounted root (jffs2 filesystem) readonly on device 31:9.
[    2.707990] devtmpfs: mounted
[    2.710966] CS-SIGILL: Not freeing unused-kernel-init-section (c000000000ab9000-c000000000b10000)!
[    7.054045] random: nonblocking pool is initialized
[   15.222809] booke_wdt: watchdog enabled (timeout = 64 sec) on core 6
[   15.229189] booke_wdt: core 6 Setting Watchdog Timer (wdt_period=34, sec=60)
